Processor

• i.MX6ULL (ARM Cortex-A7) @ 900MHz or 800MHz

RAM

• 256 to 512Mbytes (DDR3L 16bits). 256Mbytes by default

Storage

• 4 to 32Gbytes eMMC. 4Gbytes by default

Wireless connectivity (option)

• Wi-Fi b/g/n with on module U.FL connector
• Bluetooth 4.1 (BLE compatible)

Peripherals⁽²⁾

• up to 6 x UART (one reserved for debugging and one for Bluetooth)
• up to 2 x I2C
• up to 2 x SPI
• up to 6 x PWM
• up to 2 x CAN controlers 2.0B
• up to 1 x port Audio port (SAIF)
• 2 x USB OTG Hi-Speed (Host ou Device)
• 1 controlleur Ethernet 10/100 Mbits (avec on module PHY)
• up to 1 x LCD parallel controler 18bits (resolution up to 1366x768 @ 60Hz)
• up to 1 x camera parallel inerface (8bits)
• 1 x resistive tactile controler
• 2 x 12bits ADC (up to 3 inputs)
• up to 32 GPIOs with 3,3V level compatibility
• JTAG (Debugger (ICE) and test)

Tranceivers

• 1x Ethernet 10/100 Mbits autoMDX

Power supply

• Single Power supply +3.3VDC 5%

Operating conditions

• Température: 0°C..70°C (others in option⁽¹⁾)

Mechanical

• Dimensions: 37 x 22 mm
• Connector: M2 67 pins

RoHS

Yes

Embedded operating system

• Linux 4.9 or upper (preempt-rt and Xenomai extensions available, Buildroot or Debian rootfs)
• NuttX⁽¹⁾
• Bare-metal (no OS)⁽¹⁾

SOM is delivered with U-Boot and Linux pre-installed

⁽¹⁾ available on request for annual volume >250 pces

⁽²⁾ All peripherals can't be activated simultaneously due to pin multiplexing. Please read l'i.MX6UL(L) for more details.

Presentation

The OPOS6UL_Dev allows, thanks to an adaptation board, to access all the functionnalities of the OPOS6UL_NANO module.

All drivers needed to use the onboard peripherals are available in Armadeus public BSP.

Functionalities

• 1 LCD port
• 1 USB port HOST 2.0 High speed
• 1 USB port OTG 2.0
• 1 touchscreen controler (resitive, 4 wires)
• 1 USB port mini B pour debug/console
• 1 port 10/100/1000Mbits Ethernet (2nd in option)
• 1 CAN port (2nd in option)
• 1 RPI® compatible I/O port
• 1 JTAG port
• 1 user LED
• 1 user button
• 1 jumper for boot selection
• 1 Reset button

Connectors

• 1 2.5mm jack connector for power suppply (12V)
• 1 to 2 Ethernet connector(s) (RJ45) with integrated isolator and status LEDs (2nd connector available on request)
• 1 to 2 CAN bus connector(s) with tranceiver (2nd bus available on request)
• 1 USB OTG connector USB OTG (type mini B)
• 1 USB Host connector USB Host (type A)
• 1 SODIMM connector for OPOS6UL module
• 1 RPi® compatible connector (2,54 step)
• 1 JTAG connector (2,54 step)
• 1 LCD+tactile connector (2,54 step, compatible with ST0700_adapt kit)
• 1 USB serial connector connector for debugging (type mini B)
• 1 camera input connector (2,54 step)
• 2 LEDs (power suppply and user)
• 2 buttons (reset and user)

Power supply

• 12V DC Input voltage
• 5V DC/DC Converter / 3A max
• 3.3V DC/DC Converter / 4A max

Mechanical

Dimensions: 90mm x 90mm

RoHS

Yes

Schematics

Schematics of the OPOS6UL_Dev in PDF format.

Datasheets

Datasheets of the OPOS6UL_NANO in PDF format.

Datasheets of the OPOS6UL_DEV in PDF format.

Please choose the desired characteristics for your SOM: